Need help?Do you have a question about the GeoVision GV-MFD130 and is the answer not in the manual?
General| Total megapixels | 1.3 MP |
|---|---|
| Maximum resolution | 1280 x 1024 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 1280 x 960, 1280 x 720 (HD 720) |
| Pan range | -45 - 45 ° |
| White balance | Auto |
| Tilt angle range | 0 - 90 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/8000 s |
| Minimum illumination | 0.5 lx |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Fixed focal length | 2.54 mm |
| Compatible memory cards | SD, SDHC, SDXC |
| Type | IP security camera |
| Certification | CE, FCC, C‐Tick, RoHS |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio system | 2-way |
| Audio formats supported | AAC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMA, RTSP, PSIA, SNMP, QoS (DSCP), ONVIF |
| DC output voltage | +12V |
| Power consumption | 350 mA |
| Power source type | PoE |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 15.4 W |
| Cables included | LAN (RJ-45) |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| F-number (relative aperture) | 2.8 |
Weight and Dimensions| Width | 106 mm |
|---|---|
| Height | 55.6 mm |
| Weight | 280 g |
| Cable length | 1 m |
Details FCC compliance requirements for specific camera models.
Outlines UL certification details for specific camera models.
Lists the supported camera models and their corresponding firmware versions.
Specifies the system requirements for operating the GV-IPCAM H.264 via a web browser.
Lists all items included in the Box Camera package.
Details the key features and image sensor specifications of the Box Camera series.
Provides a physical overview of the Box Camera models, identifying key components.
Explains how to connect the Box Camera to the network and power supply.
Lists all items included in the Ultra Box Camera package.
Details the key features of the Ultra Box Camera series, including image sensor and frame rate.
Provides a physical overview of the Ultra Box Camera, identifying key components and LEDs.
Guides through the steps for installing the Ultra Box Camera on walls or ceilings.
Explains how to connect the Ultra Box Camera to the network and power.
Lists all items included in the Vandal Proof IP Dome package.
Details the key features of the Vandal Proof IP Dome series, including image sensor and frame rate.
Provides a physical overview of the Vandal Proof IP Dome, identifying key components.
Guides through the installation procedures for the Vandal Proof IP Dome, including ceiling and wall mounts.
Explains how to connect the Vandal Proof IP Dome to power, network, and other cables.
Describes how to configure connection to Center V2 for monitoring and management.
Explains the configuration for connecting to VSM for monitoring camera and I/O devices.
Details how the Dispatch Server redistributes subscribers to the least busy Center V2 Server.
Instructions on aligning dots on the camera cover and body to ensure proper closure.
Guidance for models without pre-marked dots, suggesting creating custom marks for alignment.
Lists all items included in the Target Box Camera package.
Details the key features of the Target Box Camera series.
Provides a physical overview of the Target Box Camera, identifying key components.
Guides through the installation steps for the Target Box Camera.
Explains how to connect the Target Box Camera to the network and power.
Lists all items included in the IR Arctic Box Camera package.
Details the key features of the IR Arctic Box Camera series, including ingress and vandal resistance.
Provides a physical overview of the IR Arctic Box Camera, identifying key components.
Guides through the installation steps for the IR Arctic Box Camera, designed for outdoor use.
Explains how to connect the IR Arctic Box Camera to the network and power using PoE.
Lists all items included in the Mini Fixed Dome and Mini Fixed Rugged Dome packages.
Details the features of Mini Fixed Dome (indoor) and Mini Fixed Rugged Dome (outdoor) cameras.
Provides a physical overview of the Mini Fixed Dome and Mini Fixed Rugged Dome cameras.
Guides through the installation procedures for the Mini Fixed Dome series.
Explains how to connect the Mini Fixed Dome and Mini Fixed Rugged Dome cameras to power and network.
Lists all items included in the Ultra Bullet Camera package.
Details the key features of the Ultra Bullet Camera series, including IP67 standard and WDR Pro.
Provides a physical overview of the Ultra Bullet Camera, identifying ports and components.
Guides through the installation steps for the Ultra Bullet Camera on ceilings or walls.
Lists all items included in the Target Bullet Camera package.
Details the key features of the Target Bullet Camera series, including IP67 standard and WDR.
Provides a physical overview of the Target Bullet Camera, identifying ports and components.
Guides through the installation steps for the Target Bullet Camera on ceilings or walls.
Lists all items included in the PTZ Camera package.
Details the key features of the PTZ Camera, including CCD sensor, zoom, and pan/tilt capabilities.
Provides a physical overview of the PTZ Camera, identifying ports and components.
Guides through the installation procedures for the PTZ Camera, including ceiling and wall mounts.
Explains how to connect the PTZ Camera to the network and power.
Lists all items included in the PT Camera package.
Details the key features of the PT Camera, including sensor, streams, and pan/tilt mechanism.
Provides a physical overview of the PT Camera, identifying ports and components.
Refers to Chapter 12 for installation procedures of the PT Camera.
Refers to Chapter 12 for procedures of connecting the PT Camera.
Lists all items included in the Vandal Proof IP Dome (Part II) package.
Details features of Vandal Proof IP Dome (Part II), including IR LEDs, WDR Pro, and temperature tolerance.
Provides a physical overview of the Vandal Proof IP Dome (Part II), identifying components and LEDs.
Guides through the installation procedures for the Vandal Proof IP Dome (Part II) on ceilings.
Lists items included in the Fixed IP Dome package for both hard-ceiling and in-ceiling mounts.
Details the key features of the Fixed IP Dome series, including image sensor and frame rate.
Provides a physical overview of the Fixed IP Dome, identifying ports and components.
Guides through the installation procedures for the Fixed IP Dome, including hard-ceiling, in-ceiling, and wall-surface mounts.
Lists all items included in the Cube Camera package.
Details the key features of the Cube Camera series, including image sensor and wireless connectivity.
Provides a physical overview of the Cube Camera, identifying ports and components.
Guides through the steps for installing the Cube Camera.
Lists all items included in the Advanced Cube Camera package.
Details the key features of the Advanced Cube Camera series, including PIR sensor and wireless connectivity.
Provides a physical overview of the Advanced Cube Camera, identifying components and LEDs.
Guides through the installation steps for the Advanced Cube Camera.
Explains how to access the live view of the camera based on its type and firmware version.
Guides on adjusting image clarity and focus using utility programs or physical adjustments.
Outlines the basic configuration steps after camera installation, such as date/time and network settings.
Provides steps to access surveillance images through a web browser.
Introduces features available on the main page, accessible by Administrator and Guest.
Covers video settings and motion detection configurations.
Details settings for digital I/O and PTZ control of the camera.
Configures how the camera handles and alerts for events like motion detection or I/O triggers.
Explains how to start monitoring manually, by schedule, or by input trigger.
Allows setting a schedule for recording and I/O monitoring.
Describes how to play back recorded files remotely using the Remote ViewLog player.
Covers basic and important network configurations for connecting the camera to a TCP/IP network.
Includes settings for date/time, user accounts, firmware version, and system operations.
Explains how to enable the recording function by inserting a memory card and configuring settings.
Details methods for playing back recorded video files from the camera.
Guides on downloading and installing updated firmware for the GV-IPCAM H.264.
Explains how to back up and restore camera configurations using the IP Device Utility.
Provides instructions on how to reset camera settings to factory defaults for various camera types.
Guides on changing the login password for Administrator and Guest accounts.
Explains how to verify the authenticity of recorded video using the Watermark Proof program.
Details how to synchronize and download recordings from micro SD cards to a local folder.
Guides on setting up the GV-IPCAM H.264 on the GV-System, including adding and configuring IP cameras.
Explains how to use the Multi View feature to monitor and manage GV-IPCAM H.264.
Describes how to create an E-Map for monitoring and managing GV-IPCAM H.264.
Provides specific security settings for Internet Explorer 8 to ensure proper functionality.
Lists compatible lenses for Box Camera models from various providers.
Details the supported resolutions and frame rates for different GV-IP Camera models and streams.
Provides support lists for GV-Backup Center, GV-Video Gateway, and GV-Recording Server compatibility.
Lists RTSP protocol commands for audio and video streaming to mobile phones.
Lists supported CGI commands and their corresponding firmware versions for different GV-IP Camera models.
Lists GV-IP Cameras that support dual stream and their default resolutions.
Indicates supported power types (DC, AC, PoE) for various GV-IP Camera models.
Specifies firmware versions supporting 128 MB flash memory for GV-IPCAM H.264 series.
To Next Page
