To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-TDR4703 Series and is the answer not in the manual?
General| Model | GV-TDR4703 Series |
|---|---|
| Category | Security Camera |
| Scan System | Progressive scan |
| Vandal Resistance | IK10 |
| Resolution | 1920x1080, 1280x720, 640x480 |
| IR Distance | 30 meters |
| Noise Reduction | 3DNR |
| Video Compression | H.264, MJPEG |
| Bit Rate | 32 Kbps ~ 16 Mbps |
| Image Settings | Brightness, Contrast, Saturation, Sharpness, White Balance |
| Privacy Masking | Up to 4 areas |
| Audio Compression | G.711 |
| Ethernet | 10/100 Mbps Ethernet, RJ-45 |
| Protocol | TCP/IP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTSP, RTP, UDP, ICMP, IGMP |
| ONVIF | Supported |
| Local Storage | Micro SD/SDHC/SDXC card slot |
| Alarm Trigger | Motion detection, Tampering, Network disconnection |
| Alarm Action | E-mail, FTP, Record to SD card |
| Humidity | 20% ~ 90% RH (non-condensing) |
| Power Supply | DC 12V ±10%, PoE (802.3af) |
| Power Consumption | Max. 6.5 W |
| White Balance | Auto / Manual |
| Gain Control | Auto |
| S/N Ratio | 50 dB |
| Frame Rate | 30fps @ 1080p |
Overview of GV-EBD and GV-EBFC5800 series IP cameras, including specifications.
Overview of GV-ABL, TBL, and GV-BLFC5800 series bullet IP cameras.
Details on GV-ADR and GV-TDR series IR mini fixed rugged IP dome cameras.
Information on GV-AVD and GV-TVD series vandal proof IP dome cameras.
Overview of GV-TFD series IR mini fixed IP dome cameras.
Details on the GV-FER5702 IR fisheye rugged IP camera.
Information on the GV-PTZ5810-IR indoor network PTZ camera.
Specifies the CPU, memory, graphics, and web browser requirements.
Instructions for waterproofing Ethernet cables using supplied rubber sets.
Steps for connecting the IP camera to the network and accessing its interface.
Guide to viewing live video streams and controlling camera functions.
Functions and operations of the Pan-Tilt-Zoom control panel.
Instructions for playing and downloading recorded videos from local storage.
Basic camera settings including basic info, network, time, and OSD.
Settings for IP address, DNS, ports, DDNS, E-mail, SNMP, 802.1x, and QoS.
Configuration for video streams, audio input, and media stream settings.
Settings for PTZ basic functions, home position, limits, and remote control.
Adjustments for image quality, exposure, OSD, and privacy mask.
Configuration for smart settings like Cross Line, Intrusion, and Face Detection.
Setup for alarms on motion detection, tampering, audio, and alarm inputs/outputs.
Settings for formatting storage, FTP server, and backing up data.
User account management and network security configurations.
Configuration for camera time, server, maintenance, and network diagnosis.
Procedures for updating camera firmware via Web interface or utility.
Steps to reset the camera to its factory default settings.
Guide to installing and configuring IP cameras with GV-DVR/NVR.
Instructions for connecting IP cameras to the GV-VMS platform.
Details on RTSP and RTSP multicast commands for video/audio streaming.
Information on using HTTP commands to obtain live view snapshots.
Lists compatible software versions for GV-VMS, DVR, and NVR.
Illustrates the dimensions of various GV-Mount accessories.
Instructions for assembling and installing GV-Mount300-2 / 310-2.
Diagrams showing screw positions for different camera models and mounts.
Guidance on mounting distance for GV-FER5702 to ensure image quality.
