GERA Z LED 60 User Manual

Bedienungsanleitung Starterset Z LED 60 Set Stand 06.03.2020
(TNR: 33700066 / 33700067) GERA Leuchten GmbH
Anleitung zur Inbetriebnahme und Bedienung der
verstellbaren LED-Leuchten
Im Auslieferzustand haben die Funkfernbedienung und die mitgelieferte Steuereinheit bereits eine
Verbindung zueinander. Das Anlernen weiterer Steuereinheiten wird unter Punkt 3 beschrieben.
1. Funkfernbedienung
2. Vorbereitung der Funkfernbedienung
(1) Auspacken der Funkfernbedienung
(2) Deckel auf der Rückseite der Funkfernbedienung öffnen und den Isolationsstreifen aus dem
Batteriefach entfernen. Anschließend den Deckel wieder schließen.
(3) Magnethalterung an gewünschter Stelle mit dem mitgelieferten doppelseitigen Klebeband
anbringen. Alternativ können auch die beiden Schrauben verwendet werden.
heller
kaltweiß
dunkler
Ein-/ Ausschalttaste
warmweiß
Zonentasten 1-6
Konverter
Steuereinheit
9-fach Verteiler
max. 60 Watt
max. 36 Watt
Anlerntaste
Netzanschlusskabel
Funkfernbedienung
Isolationsstreifen
Deckel

GERA Z LED 60 Specifications

General

Brand	GERA
Model	Z LED 60
Category	Light Fixture
Language	English

Summary

Radio Remote Control and Control Unit Overview

ON/OFF Button

Controls power for all zones.

Brightness Adjustment

Increases or decreases light intensity.

Color Temperature Adjustment

Adjusts light color between cool and warm white.

Zone Keys 1-6

Allows selection and control of specific light zones.

Training Key

Used for pairing the remote with control units.

Preparing the Radio Remote Control

Unpacking and Battery Preparation

Initial steps including unpacking and removing the insulating strip.

Mounting the Holder

Instructions for attaching the remote holder using tape or screws.

Training Control Units for Radio Remote

Variant 1: Training via Control Unit Button

Step-by-step guide for training using the control unit's button.

Variant 2: Training via Power Interruption

Method for training when control unit physical access is limited.

Managing Multiple Control Units

Training for Individual Zone Control

Example of training units for independent zone activation and settings.

Training for Synchronized Zone Control

Example of training multiple units for synchronized operation within one zone.

Operator Control and Light Adjustment

Zone On/Off and Selection

How to turn all zones on/off or select specific zones for control.

Adjusting Light Settings

Methods for adjusting brightness and color temperature using remote keys.

Troubleshooting Common Issues

No Response to Remote Control

Diagnosing why the light source does not react to the radio remote.

Light Flashing or Dimming Problems

Resolving issues with lights flashing continuously or having inconsistent brightness.

Color Temperature Inconsistencies

Addressing problems where light color is not uniform across sources.

Connection and Polarity Errors

Troubleshooting loose connections, cable breaks, or reversed light source polarity.

Connecting to a Zigbee Hub

Resetting Control Units to Factory Settings

Procedure to reset control units to prepare for Zigbee pairing.

Initiating Zigbee Hub Search Mode

Steps to put the Zigbee hub into discovery mode.

Zigbee Unit Pairing Process

The sequence for the control unit to be recognized by the Zigbee hub.

Zigbee Hub Connection Troubleshooting

Zigbee Device Not Recognized

Troubleshooting steps when the Zigbee device fails to connect or be found.

Connectivity and Software Issues

Addressing power supply, WLAN, hub network, or outdated software problems.

Smart Home System Compatibility

Checking compatibility with smart home systems and required hardware/software.

Conflict with Existing Remote Pairing

Resolving issues when the control unit is already paired with a remote.