Operating Instructions Centrifuge Micro III
Gerber Instruments AG 1 Version 1.2 (03/2021)
Table of contents:
1. Introduction 3
1.1 Use 3
1.2 Description 3
1.3 Ambient conditions 3
2. Safety instructions 3
2.1 Symbols of the operating instructions 3
2.2 General safety 4
2.3 Informal safety instructions 4
2.4 Safety instructions for centrifugation 5
2.5 Safety instructions for cover lock 5
2.6 Safety instructions for unbalance switch-off 5
3. Description of centrifuge Micro III 6
4. Unpacking/Device control 7
4.1 Unpacking 7
4.2 Device control 7
4.3 Control accessories 7
4.4 Avoiding damages on the device 7
5. Description of operating unit 8
5.1 Segment display 8
5.2 LED-displays 8
5.3 Button functions 9
6. Commissioning 10
6.1 Initial start 10
6.2 Setting the preheating function 10
6.3 Setting time and temperature 11
7. Daily work
11
8. Cleaning and maintenance 12
8.1 General notes for cleaning and maintenance 12
8.2 Notes for cleaning with glass breakage 12
9. Checking the unbalance switch-off 12
10. Disturbances 13
10.1 Error table 13
10.2 Emergency release of the lid on power interruption 13
To Next Page
Loading...