Operating Instructions Centrifuge Micro III
Gerber Instruments AG 3 Version 1.2 (03/2021)
Warning symbol: Attention, possible dangerous situation
Warning symbol: Dangerous electrical voltage
1. Introduction
1.1 Use
The small centrifuge Micro III is used for the determination of fat in milk and dairy products
according to Gerber or Babcock.
1.2 Description
The centrifuge Micro III has high safety standards and reliability and following
product features:
Strong sheet steel housing with an acid-resistant paint work
Cover lock to prevent opening of the centrifuge during operation
Motor with elastic bearing for a smooth run
NEW: Increased precision thanks to the controlled speed
NEW: Preheating option
NEW: Unbalance switch-off in case of uneven filling or sudden glass breakage
1.3 Ambient conditions
Permissible ambient temperature +10 °C to +40 °C
Max. humidity 80 %
Lowest storage and transport temperature -20 °C
2. Safety instructions
2.1 Symbols of the operating instructions
To Next Page
Loading...