Watch the video clip
Operating Instructions
1. Check the voltage:
Check the household voltage to ensure it matches the appliance’s rated
specication. Be sure to plug into a 220-240 V~ 50 / 60 Hz outlet.
2. Power On/Off:
Put in the plug, press the
on remote control or control panel, you can hear
beeping, and fan working. The fan with memory function and working at last
setting.
3. Speed:
Product has 12 speeds with 12 LCD light on fan body / 12 digital on LED display by
, or
in Normal Mode, one light at the fan body and 01 on display mean as a speed. For example, if
you choose the rst speed, then one light on, 01 on display; if you choose the second speed, then
second lights on, 02 on display.
4. Mode:
Press the
button to select desired wind mode, NATURE > SLEEP > NORMAL > NATURE in turn.
The corresponding wind mode indicator will be displayed by > > .
5. Timer:
Press the button to limit the ON time from 01 - 12 hours (0 - 6hours increased by 0.5hour inter-
vals, 6 - 12hours increased by 1hour intervals, the LED display shows 0.0 to indicate that the time
is turned off). The LED display will light up the digital.
Note: Remote control operation function is different as the control panel on unit.
Install one CR2032 lithium button battery (include).
To Next Page
Loading...