P.15
Care & Maintenance
Cleaning the Fan
1. Before cleaning the fan, please turn off the switch and pull out the plug.
2. Please use a screw driver to remove the front cover/back cover/blade of the
fan. Turn clockwise to tighten, anti-clockwise to loosen.
3. Wipe the fan surface with a damp cloth. Do not use a hard tool such as a wire
brush, disinfectant or corrosive detergent to clean the fan to avoid scratching
and damaging the surface.
4. After cleaning, please ensure the blade is dry and then install it.
Watch the video clip
Moving the Fan
1. Be sure to turn off the operating fan before moving.
2. Be sure to disconnect the power before moving.
Tight
Tight
Loose
Loose
TightLoose
To Next Page
Loading...