German pool GPU-3.5 - 產品特點 Features

內膽結構
Inner Tank Material
採用長期耐高溫及受高壓容器專用之日本特殊不銹鋼製造，內膽結構堅
固，保證防銹、耐壓及不受水質侵蝕。
Constructed of Japanese heavy gauge stainless steel, specially made for high
temperature and pressure applications. It is durable and free of rust, corro-
sion, deformity and hassle.
保溫
Thermal Insulation
完密噴注式保溫層，採用高密度合成樹脂纖維絕熱法保持溫度，失溫程
度達至最低，保持熱水溫度。
Maximum thermal insulation is achieved by high-density polyurethane foam
injectionmouldedorbya2”thickbreglassblanketbetweentheinnertank
and outside casing.
發熱管
Heating Element
德國原廠優質不銹鋼發熱管，獨立功率由 1.5千瓦至 12千瓦，符合各
種不同之熱水要求。
Prime quality stainless steel heating element from Germany ensures maxi-
mumthermalefciencyeveninplaceswheredifferentvoltageapplies.
來水要求
WaterSupplySource
直接自來水供應或水箱供應均可。
Main supply or water tank supply.
來水壓力
WaterSupplyPressure
500 kPa (5 bar) 或以下。
500 kPa (5 bar) or below.
試水壓力
Test Pressure
2,000 kPa (20 bar).
超溫感應
Temperature Relief
當水溫達到90℃時，超溫感應排放閥門便會自動打開。
Whenwatertemperaturereaches90°C,waterwillbereleasedthroughthe
Temperature Relief Valve.
溫度調節器
Thermostat
法國原廠高靈敏度溫度調節器，可隨時調校水溫(最高溫度75℃)。
HighsensitivitythermostatimportedfromFrance.Watertemperaturecanbe
convenientlyadjustedupto75˚C.
防水等級
WaterResistance
IPX4.
符合規格
Conformity
機電工程署電氣產品﹙安全﹚條例。
Electrical Products (Safety) Regulation, Hong Kong.
認證標準
Certications
IEC 60335-2-21
IEC 60335-1
P.4
德國寶GPU系列中央儲水式電熱水器採用先進
科技及根據國際標準(IEC)生產而成，同時可
接駁多個出水位使用，符合世界所有國家有關
之安全標準及水務條例。除設有水線防止漏電
外，更配備「五重保險裝置」，確保安全︰
•自動恆溫設備
•超溫斷路設備
•超溫感應排放閥
•超壓感應排放閥
•防倒流裝置
產品特點 Features
German Pool GPU Series Central Storage Electric
WaterHeaterisdesignedformulti-pointapplication.
It conforms to the Standards of International
Electro-technical Commission (IEC Standards) and
complies with safety standards and waterworks
regulations worldwide. GPU is built-in with “5-Tier
Safety Device” for absolute safety:
•AutomaticThermostaticControl
•ThermalCutout
•TemperatureReliefValve
•PressureReliefValve
•Anti-VacuumDevice