To Next PageTo Next Page
Need help?Do you have a question about the Gessi 40442 and is the answer not in the manual?
Minimum/maximum pressure, temperature, and waste requirements.
Minimum required feeding for correct shower system operation.
Maximum delivery for shower system with specific pipes.
Verify system positioning, use template, and drill for stirrups.
Remove template, insert plugs, position screws without full tightening.
Mount stirrups (C) to the wall and secure them by tightening fixing screws.
Slide lower carter and shower head into stirrup guides.
Adjust shower head position and fasten securely.
Connect to system, insert wall guard, and install upper guard/cover.
Ensure safety, turn off water, use qualified personnel for repairs.
Gently clean nozzles manually or use a sharp object for persistent clogging.
Remove guard, unscrew hose, and clean gasket with running water.
Remove atomizers with wrench, rinse with running water.
Disassemble and clean the shower head plate.
Treat splashes, use appropriate cleaners, rinse, and dry surfaces.
Guidelines for cleaning brushed and mirror-polished stainless steel.
Avoid chloride products, bleach, silver cleaners, abrasives, and wire brushes.
General| Brand | Gessi |
|---|---|
| Model | 40442 |
| Category | Bathroom Fixtures |
| Language | English |
