25LRR 1-52, LRR 1-53, URB 55 - Installation & Operating Manual - 850645-01
Installing the LRR 1-52, LRR 1-53 conductivity controller
The LRR 1-52, LRR 1-53 conductivity controller snaps onto a TH 35 support rail in the control cabinet.
DANGER DANGER
There is a risk of electric shock during work on electrical systems.
■
Switch off the voltage to the plant before you install the equipment.
■
Check that the system is not carrying live voltage before commencing work.
1. Switch off the voltage to the system, or secure the surrounding equipment in the control cabinet, if
live, so it cannot be touched.
2. Carefully press the unit onto the support rail until the holder clips into place.
To Next Page
Loading...
Need help?
General
