Getac F110 Series - Navigating on the Screen; Using the Touchscreen

19
Navigating on the Screen
The screen of your Tablet PC is touch-sensitive. You can control the location of
the cursor/pointer on the screen using the included stylus or your finger to
communicate with the Tablet PC.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use the included stylus
or your finger.
NOTE: An optical film has been attached to the screen before shipment. The film is a
consumable, which will be worn out by possible scratches. You can purchase a new
one when replacement is required.
Using the Touchscreen
Your Tablet PC has a capacitive touchscreen, which responds to objects that have
conductive properties, such as fingertips and a capacitive-tipped stylus.
You can change the touchscreen sensitivity settings to suit your scenario.
Double-tap the Touch Screen Mode shortcut on Windows desktop to open the
settings menu and select one of the options (as shown below).
Enables simultaneous use
with Getac stylus or finger
touch. (You must use the
stylus supplied with your
model.)
Has a higher sensitivity to allow use
with gloves (referring to warm gloves
or work gloves, not referring to
touchscreen-capable gloves).
Select this mode when liquids,
such as raindrops, are falling on
the screen and should be
rejected as input. Works best
with fingertips.