3
Installing the Battery Packs
Your Tablet PC has two battery compartments for two battery packs; each is
installed in the same way.
1. With the battery pack correctly oriented, attach its connector side to the
battery compartment at an angle (
) and then press down the other side
(
).
NOTE: If you have the high-capacity battery model, the battery pack looks different
from the one shown here. The removal/installation method is the same.
2. Slide the battery latch toward the locked position ( ).
CAUTION: Make sure the battery latch is correctly locked, not revealing the
underneath red part.
To Next Page
Loading...
