EasyManua.ls Logo

Getac F110 Series - Initializing the Battery Pack; Checking the Battery Level

Getac F110 Series
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
The two battery packs are charged in parallel. The charging time is
approximately 5 hours (for the standard battery packs) and 6 hours (for the high-
capacity battery packs) when the power is off.
CAUTION: After the Tablet PC has been fully recharged, do not immediately
disconnect and reconnect the AC adapter to charge it again. Doing so may damage
the battery.
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time or when
the actual operating time of a battery pack is much less than expected. Initializing
is the process of fully charging, discharging, and then charging. It can take
several hours.
The G-Manager program provides a tool called “Battery Recalibration” for the
purpose. (See 錯誤! 找不到參照來源。 in Chapter 6.)
Checking the Battery Level
NOTE: Any battery level indication is an estimated result. The actual operating time
can be different from the estimated time, depending on how you are using the Tablet
PC.
The operating time of a fully charged battery pack depends on how you are
using the Tablet PC. When your applications often access peripherals, you will
experience a shorter operating time.
The two battery packs are discharged in parallel.

Table of Contents

Related product manuals