2
English
Getting Your Device Ready for Use
Installation
1. Turn the latch handle to unlock the
battery cover and detach it.
2. Select models only: Insert the SIM
card with the chip side facing up
and the beveled corner pointing to
the slot.
3. Insert the battery’s connector end
first and then lower the other side.
4. Replace the battery cover and turn
the latch handle to the locked
position.
Charging the Battery
Connect the AC adapter to
charge the battery.
The charge indicator glows in
amber when charging is in
progress. When the battery is
fully charged, the amber
indicator turns into green.
Fully charge the battery before
using your device for the first
time.
Performing the Initial
Startup
1. Press the power button to turn on
your device.
The backlight of the keypad will
light up and, after a few seconds,
the setup screen appears.
2. Follow the on-screen instructions to
complete the setup wizard.
3. Select models only: If a SIM card has
been inserted and the mobile phone
network operator (or you) has set
the PIN, you will be prompted to
enter the PIN.
4. After the setup is completed, the
Today screen appears. You can now
use your device.
To Next Page
Loading...
Need help?
General
