1
English
Getting Started
Unpacking
S410 notebook computer
AC power cord Main battery pack
AC adapter
Additional battery
pack*
and/or
Screw for the SSD
module
Stylus and tether*
Document(s)
Driver disc*
* Optional
Installing the Battery Pack(s)
NOTE: The number of battery packs supplied
depend on your model.
Noting the orientation, insert the battery
pack all the way into the bay. The battery
latch should be engaged in the locked
position ( ).
Main battery pack:
Additional battery pack (opitonal):
Additional battery pack (opitonal):
Connecting to AC Power and
Starting Up
The first time you use your computer, connect
the AC adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the computer (
).
2. Plug the female end of the AC power cord
to the AC adapter and the male end to an
electrical outlet (
).
3. Open the top cover by pulling the cover
latch and lifting up the cover.
4. Press the power button ( ) to start up.
5. The Windows operating system should
start.
When turning on your computer for the
very first time, you will be guided through
a setup process. Follow the onscreen
instructions to complete.
To Next Page
Loading...
Need help?
General
