What to do if nothing appears on the screen of my Getac B360 Laptop?
If nothing appears on your Getac Laptop screen, it might be due to power management settings. Try pressing any key to wake the screen. Also, the brightness level might be too low, so increase it. If the display output is set to an external device, switch it back to the LCD by pressing the Fn+F5 hot key or changing the display settings.
What to do if my Getac B360 Laptop doesn't recognize a new device?
If your Getac Laptop does not recognize a newly installed device, the device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type. Also, make sure any necessary device drivers are installed. Check the cables or power cords for correct connections. For an external device with its own power switch, ensure the power is turned on.
How to fix network connection issues on my Getac Laptop?
If you cannot access the network on your Getac Laptop, ensure the LAN cable is properly connected to the RJ45 connector and the network hub. Verify that the network configuration is appropriate and that your username or password is correct.
General| CPU configuration (max) | 1 |
|---|---|
| Intel Flex Memory Access | Yes |
| Intel Trusted Execution Technology | No |
| Configurable TDP-up | 25 W |
| Configurable TDP-down | 10 W |
| Configurable TDP-up frequency | 2.1 GHz |
| Configurable TDP-down frequency | 0.8 GHz |
| SSD capacity | The Solid State Drive's storage capacity in Gigabytes. |
| Card reader integrated | - |
| Total storage capacity | 256 GB |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity | 2 |
| Internal memory | 8 GB |
| Keyboard language | German |
Step-by-step guide for initial setup, including unpacking and powering on the device.
Introduces the external components of the computer by location.
Details the keyboard layout, special keys, and how to use them for input.
Explains how to use the touchpad, including gestures, pointing, and clicking actions.
Covers connecting to LAN, WLAN, Bluetooth, and WWAN networks.
Information on using the AC adapter, its specifications, and precautions.
Details on charging, initializing, checking battery level, and replacing the battery pack.
Details on connecting USB devices, monitors, and serial devices.
Instructions for using storage cards, smart cards, ExpressCards, and PC Cards.
Step-by-step guide for installing or replacing the Solid State Drive (SSD).
Explains when to access BIOS and how to navigate its menus and options.
Overview of the Information, Main, Advanced, Security, and Boot menus in BIOS.
Overview of the G-Manager software for system management and configuration.
Guidelines for protecting, cleaning, and properly handling the computer.
Best practices for battery charging, usage, and storage to ensure longevity.
Initial checklist and steps before troubleshooting common computer issues.
Solutions for common issues like battery, Bluetooth, display, and DVD drive problems.
Procedures for system recovery using Windows RE and recovery partitions.
Detailed technical specifications of the computer's hardware components and ports.
Critical safety warnings regarding battery handling, AC adapter use, and heat concerns.
Statements on FCC, Canadian, and EU compliance, including RF and EMC regulations.
To Next Page
