Getac B360 User Manual

33
Using the Fingerprint Scanner
(Optional)
CAUTION:
 For optimal performance, both the scanning surface and the finger should be
clean and dry. Clean the scanning surface when needed. You can use
adhesive tape to remove dirt and oil from the scanner surface.
 It is not recommended that you use the fingerprint scanner in a below-freezing
temperature. The moisture on your finger can freeze to the scanner’s metal
surface when you touch it, resulting in a failed operation. Besides, touching
freezing metal with your finger can cause frostbite.
The fingerprint scanner provides a strong authentication mechanism based
on fingerprint recognition. You can log on to Windows and dismiss the lock
screen with an enrolled fingerprint instead of a password.
Enrolling a Fingerprint
NOTE: You can enroll a fingerprint only after creating a password for the
Windows user account.
1. Click  Settings Accounts  Sign-in options.
2. On the right side under Fingerprint, click Set up.
3. Follow the onscreen instructions to complete. When placing your finger
on the scanner, make sure you position your finger correctly as described
and illustrated below.
Fingerprint scanner

Getac B360 Specifications

General

CPU configuration (max)	1
Intel Flex Memory Access	Yes
Intel Trusted Execution Technology	No
Configurable TDP-up	25 W
Configurable TDP-down	10 W
Configurable TDP-up frequency	2.1 GHz
Configurable TDP-down frequency	0.8 GHz
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
Card reader integrated	-
Total storage capacity	256 GB
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	2
Internal memory	8 GB
Keyboard language	German