Getac B360 User Manual

52
Using Smart Cards
Your computer has a smart card reader. With an embedded microcontroller,
smart cards have the unique ability to store large amounts of data, carry out
their own on-card functions (e.g., encryption and mutual authentication),
and interact intelligently with a smart card reader.
To insert a smart card:
1. Locate the smart card slot and open the protective cover.
2. Slide the smart card, with its label and embedded computer chip facing
up into the slot.
3. Close the cover.
To remove a smart card:
1. Open the cover.
2. Make sure that the third-party smart card software is not accessing the
smart card.
3. Pull the card out of the slot.
4. Close the cover.

Getac B360 Specifications

General

CPU configuration (max)	1
Intel Flex Memory Access	Yes
Intel Trusted Execution Technology	No
Configurable TDP-up	25 W
Configurable TDP-down	10 W
Configurable TDP-up frequency	2.1 GHz
Configurable TDP-down frequency	0.8 GHz
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
Card reader integrated	-
Total storage capacity	256 GB
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	2
Internal memory	8 GB
Keyboard language	German