55
Expanding or Replacing
Installing the SSD
1. Turn off the computer and disconnect the AC adapter.
2. Locate the SSD and open the protective cover.
3. Skip this step if you are expanding your computer from one SSD to two
SSDs.
If you are replacing an existing SSD, pry the rubber strip (
) of the SSD
(SSD 1 or SSD 2) to release the strip, and, using the rubber strip, pull the
SSD canister out of the slot (
).
4. Noting the orientation, insert the SSD canister all the way into the slot.
5. Make sure the rubber strip is engaged.
6. Close the cover.
To Next Page
Loading...
