Getidy KD Series - Operation Instructions; Operator Interface Overview

4.JN-23 steam sterilizer function and operation instruction
4.1 JN series steam sterilizer contains 1-time(solid/plastic) and 3-times(hollow/prion/cotton) vacuum programs.
With lager color LCD screen for showing pressure, temperature, time, running state and error warning.
Temperature precision: 0.1℃ ;Pressure precision: 0.001bar.
4.2 Operator interface introduction
Turn on the power at the bottom right,click the power revert button located on the right side of the middle.
Page 16 of 58
“SET UP 1”
1.Language:
Chinese/Russian/Spanish/Farsi
English/French/Italian
2.Date and time
3.User information
4.Calibration:
Temperature/Pressure/Water quality
monitoring
5.Preference:
6.Service:
Maintenance Infor/Pipeline Cleaning
SystemTest/Alarm Codes/ Auto-Water
Supply
Sleepmode/Delay Start/Power Saving
“SET UP 2”
1.System information
2.Label Printer
3.USB Record
4.MINI-Printer
5.System Setting
6.Cellphone App
“Vacuum Test”hot key
“134 PROIN”PROGRAM hot key℃
“Vacuum Test”“Helix Test”“B&D Test”
Unlock icon.
Only when it is displayed on the screen,
can be open the door.
Main Interface
Sterilization Program:
1. （ ）
（ ）
（ ）
（ ）
（ ）
Solid 134 -04Min-1times
2.Hollow 134 -04Min-3times
3.Prion 134 -20Min-3times
4.Cotton 121 -30Min-3times
5.Plastic 121 -20Min-1times
6.User-definned
Temperature:121 or 134
Sterilization time:04~60Min
Dry time:01~60min
Vacuum times:1times or 3times
℃
℃
℃
℃
℃
℃ ℃