EasyManua.ls Logo

Getnord Walrus - SIM and Device Unlocking

Getnord Walrus
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 7
your phone in order to unlock the SIM card for regular use� Users can clear the
code� In this setting, the SIM card cannot be protected from illegal use�
1 Press and hold the Power / Menu Exit key to switch on the phone�
2 Enter the PIN1 code� Press “Clear” to erase any input errors and “Ok” to enter� For
example, to set PIN1 as “1234”, input 1, 2, 3, and 4 in turn; then, press “Ok”�
3 Enter the PIN2 code if SIM2 card is installed�
WARNING: If you enter an incorrect PIN code three times in a row, the network will
lock your SIM card, and the phone will request the PUK1 code�
TIP: Your network service provider will set a standard PIN code (4-8 digits) for your
SIM card� Please change it with your private password�
Screen Lock
In order to prevent the user from accidentally powering off the phone, modifying the
menu, or making any accidental calls, the phone goes into locked mode after one
minute of inactivity� To make a call, browse the menu, send messages, or use other
functions, you must unlock the screen with the following sequence: press Torch Key
/ Left Function Key -> then immediately press the * key� The phone is now set to
normal use�
WARNING:
• SOS function is active in Locked Screen Mode�
• Incoming calls unlock the screen�
TIP:
• It is not necessary to unlock the screen to use the Torch Light� Long press
Torch key / Left Function key to turn on the Torch�
• You can lock the screen by long pressing the * key
Unlocking the device
By setting a password for your phone, you can protect your device from
unauthorized use� After this function is selected, you must enter the password to
unlock your phone for regular use� Users can deactivate the phone lock code� In this
case, your device may not be protected from unauthorized use�
1 Hold the Power / Menu Exit key to switch on the phone�
2 Enter the phone’s password� To clear any errors, press “Clear”� To end, press
“Ok”� For example, if the password is set as “1122”, enter 1, 1, 2, and 2 in turn and
press “Ok”� If you forget your phone’s password, please contact the dealer or the
authorized local customer service center