3029
8. Care & Cleaning 8. Care & Cleaning
1-Bean Hopper Lid, Powder Chamber, 2-in-1 Silicone Lid, Portafilter
Bracket, Coffee Spoon and Cleaning Brush are dishwasher safe, bean
hopper and upper burr are not dishwasher safe.
NOTE
2-Make sure the bean hopper and upper burr must be wiped dry after
cleaning, otherwise they would probably damage the grinder and affect
your coffee.
If the grinder is not running smoothly during idling, repeat the above
steps 9-30 immediately before proceeding to next step.
NOTE
Insert upper burr into the
grinder by aligning the
burr's white dot with the
notch on the grinder collar.
1
34
35
Attach coffee spoon and
brush to the bean hopper
lid.
Secure lid on top of bean
hopper.
336
1
1
Hold the bean hopper and
rotate it clockwise to lock.
Put down the bean hopper
and align with .
Insert & Align
Rotate
37
38
39
Insert the power plug into
a 120V AC power outlet.
Touch the Start/Stop icon
to see if grinding sound is
smooth and there is any
powder coming out.
Idling test the machine to
check whether the grinder
running smoothly.Also to
see whether time shown
on screen starts to count
down and then machine
will automatically stop.
43
44
1
140
Hold bean hopper and
rotate to select the co-
arsest grind size.
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
1
1
MAX
41
For safety purposes, the
machine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.
42
To Next Page
Loading...
