109
1-Bad beans will not only affect your grinding results but also ruin your final
coffee. There are many types of beans on the market. To ensure best grinding
results, high quality beans are recommended.
Element 1: Beans
4.6 Idling Test
Install bean hopper to gri-
nder by aligning with .
Hold the bean hopper and
rotate it clockwise to lock.
1
4
5
4. Before First Use
5. The Quest For Perfect Powder
Insert & Align
Touch the Start/Stop icon
to start grinding.
When it is plugged again
into a power outlet, for
safety purposes, the ma-
chine will automatically
enter safety-lock mode
in which the Start/Stop
icon will flash. In this ca-
se, long press the Start/
Stop icon for 2 seconds
to unlock.
Idling test the machine to
check whether the grinder
running smoothly.Also to
see whether time shown
on screen starts to count
down and then machine
will automatically stop.
Rotate
2-All of the flavor comes from the beans, choose different kinds of roasts and
beans according to the type of coffee you make.
3-Buy in small batches to reduce the storage time due to use freshly roasted
coffee beans with a ‘roasted on’ date to maximize flavor, not a use-by or
best before date.
4-Store coffee beans in a dark, cool and dry place. Vacuum seal if possible.
Do not store beans in the bean hopper. Place them back in an airtight con-
tainer.
If you buy large portions of beans, separate them into one or two week portions
and store them in airtight containers. Preserve freshness by minimizing exp-
osure to air, light, and moisture.
1-As our machine is equipped with a voltage of 100-120V and UL plug, to
prevent burning out, do not connect the grinder with any improper power
supply.If the machine is not connected to a voltage of 100-120V, you make
sure an adapter is being used.Rated power of the adapter should be higher
than 300W, otherwise it will not function normally or even could be burnt out.
NOTE
2-Do not touch LED screen with oily hands or using too much force, oth-
erwise it will not work.
1
2
3
To Next Page
Loading...
