1211
1-Optimal grind size depends on many factors including brewing method, roast
darkness, bean type and freshness, and more. Experiment with different grind
settings to achieve the brew that best suits your taste.
3-If your coffee tastes too bitter, try a coarser grind size. If your brew is weak,
adjust to a finer grind size. (1=finest, 35=coarsest).
COFFEE TYPE ESPRESSO DRIP POUR OVER FRENCH PRESS
COARSE
25-35
MEDIUM
15-25
FINE
1-15
GRIND SIZE
GRIND SETTING
Element 2: Grinding Size
1-If the grind is too fine, overextraction and bitterness will result. Too fine
a grind may also clog the filter and cause water to overflow.
NOTE
1-This grinder can only grind dry beans. It will not grind anything moist, ext-
remely hard, or gummy such as whole ginger, chocolate, sesame seeds or oily
spices such as cinnamon, cloves or nutmeg. Do not grind peanuts or grains
such as wheat, rice, barley, or dried corn. Attempting to grind any of these
foods may damage the unit. Never use it to chop ice cubes.
6-When storing the machine, run grinder empty to clear ground beans left in
chamber, as some older coffee dust may be sitting inside your Grinder and will
affect the quality of your next batch.
Element 3: Operation Tips
5. The Quest For Perfect Powder 5. The Quest For Perfect Powder
2-You may need to vary the Grind Setting when using different coffee beans
and depending on bean freshness. The range of 35 Grind Settings allows for
precision adjustment, controlling the grind size and ultimately the character-
istics of the resulting extraction.You can refer to the following table:
2-It is recommended not to pour too many beans into the bean hopper at
once, and to grind beans as much as you need at the time of use for best
flavor. If you add too many beans, remove them from the bean hopper and
store them in a vacuum container.
3-To pause grinder during operation, press Start/Stop icon to stop.
4-After every time switch grind setting size, firstly place the silicone lid of
powder chamber under the grinder powder outlet, and then grind a small
amount of beans and discard, this can avoid powder from your last grind
affecting your coffee.
If you feel hard to adjust grind size by rotating the bean hopper from coarse
to fine, rotate the Grind Size Selector while the machine is grinding. If this
still does not work, refer to "8.2 Weekly Using " of "8.Care & Cleaning ", page 24.
5-To save your time and meet your personal taste, we suggest that you firstly
test to confirm your desired grind size and bean amount, and then grind the
beans by time mode. Make a note of how much time it takes so that next
time you can easily get your desired powder by inputting the recorded time
based on same type of beans and grind size. If changing grind size and beans,
please follow the above method to get the new time.
7-Do not operate the grinder for more than 3 minutes at a time, Otherwise the
grinder will stop automatically to protect its motor and maintain its lifespan.
The grinder will not start regardless of any operation until it cools down for 30
minutes.
2-If grind is too coarse, the water will pass through too quickly and the
maximum flavor will not be extracted.
To Next Page
Loading...