How to fix a Gevi GIMN-1000B Ice Maker that is not making ice?
If your Gevi Ice Maker isn't producing ice, several factors could be the cause. Ensure there's at least a 15cm/6inch clearance on all sides for proper heat dissipation. Also, verify that the water temperature is between 46°F(8°C) and 82°F(28°C), and the ambient temperature is between 50°F (10°C) and 90°F (32°C).
Why is my Gevi GIMN-1000B so noisy?
A noisy Gevi Ice Maker can stem from a few causes. If ice-making components are frozen, turn off the machine for 45 to 60 minutes to allow the ice to melt. Resonance from objects in contact with the ice maker can also cause noise, so remove any such objects. Note that some sound during operation is normal.
What to do if the Gevi GIMN-1000B shows 'Add Water'?
If the Gevi Ice Maker displays the 'Add Water' message, it indicates that the water level is low. You should manually add water to the reservoir. Another potential cause is a blocked water screen in the water reservoir, which requires cleaning. If the issue persists, it might be due to a pump malfunction.
Why does my Gevi Ice Maker say 'Full' when it's not?
The 'Full' indicator on your Gevi Ice Maker might be on for several reasons. First, check if the ice basket is actually full and empty it if necessary. Second, make sure the ambient temperature is within the ice maker's operating range. Also, the infrared sensor might be blocked by ice; inspect and clean it if needed. If none of these resolves the issue, there may be an NTC malfunction.
What to do if 'Making' and 'Cleaning' lights are flashing on my Gevi GIMN-1000B?
If both the 'Making' and 'Cleaning' lights are flashing on your Gevi Ice Maker, it could mean the ice making components are frozen. To resolve this, unplug the ice maker for 45-60 minutes to allow the ice to melt. After that, run the cleaning program 2-3 times using fresh water.
Why are the 'Making' light on and 'Cleaning' light flashing on my Gevi Ice Maker?
When the 'Making' light is on and the 'Cleaning' light is flashing on your Gevi Ice Maker, it indicates that the appliance is in defrosting mode. This process will complete in approximately 30 minutes, requiring no action from you. Alternatively, you can manually restart the appliance by holding the 'Clean' button for 3 seconds, and then pressing the 'ON/OFF' button again.
Guidelines for operating the ice maker outdoors, including temperature and shade considerations.
Essential electrical safety precautions, grounding, and proper outlet usage for the ice maker.
Instructions for the safe and legal disposal of refrigeration products, including refrigerants.
Steps and important notes for unpacking the ice maker and its accessories.
Overview of the ice maker's components, controls, indicators, and frequently asked questions.
Crucial preparation steps before operating the ice maker for the first time.
General operation steps: adding water, draining, heat dissipation, magnetic switch, and turning off the unit.
Detailed steps for initiating and managing the ice-making process.
Procedure for cleaning the ice maker, including the self-cleaning function.
Instructions for descaling the ice maker to maintain performance and longevity.
Information on how to purchase an extended warranty or register for a free extension.
General| Model | GIMN-1000B |
|---|---|
| Ice Production Capacity | 26 lbs per day |
| Ice Storage Capacity | 1.5 lbs |
| Ice Type | Bullet |
| Weight | 17.2 lbs |
| Cycle Time | 6-8 minutes |
| Noise Level | 42 dB |
| Ice Size | Small |
| Power Consumption | 120W |
| Voltage | 120V |
To Next Page
