Need help?Do you have a question about the GEW RHINO and is the answer not in the manual?
Provides Original Instructions for installation and commissioning of GEW UV system.
Explains symbols used to highlight dangers and safety precautions. Failure to follow may invalidate warranty.
Details the division of the manual into modules for different GEW equipment.
Explains GEW power supply systems consist of modular RPSUs housed in RRs.
Specifies temperature, humidity, and altitude limits for installation location.
Guidelines for positioning the RR relative to the host press and mains supply.
Procedures for safely lifting and moving the RHINO Rack (RR) units.
Details how power is distributed within the RR and internal protection mechanisms.
Outlines requirements for the dedicated mains power supply for the UV system.
Emphasizes monitoring voltage variations and available voltage raising/lowering transformers.
Discusses harmonic demand and its impact on transformers, requiring planning per EN61000-4-12.
Provides instructions for connecting the RR to the mains electricity supply, emphasizing qualified electricians and pre-connection checks.
Explains the importance of supplementary earthing for cabinets and connections.
Step-by-step guide for connecting the mains supply to 1 & 2-way RRs.
Instructions for connecting mains supply to 6 & 8-way RRs.
Information on the transient suppression protection and its status indicators.
How power is distributed from the RR to individual RPSUs.
Describes connecting RPSUs to lampheads via specific cables.
Details connecting autodampers to the RPSU using specific connectors.
Explains the CAN Bus system for HMI communication with RPSUs.
How to connect the pneumatic system for shutter operation to lampheads.
Instructions for connecting power to the cooling fans.
Explains how to check correct phase rotation for fan operation via LEDs.
Describes connecting the HMI panel to the RR via a GEW cable.
Explains the standard electrical interface between GEW UV systems and the host press.
Details the wiring connections between the RHINO Power Supply and the Customer's Press for various signals.
Details chiller interlock connection for water-cooled systems.
Essential checks to perform after installation, like securing cables.
Guides the user to fill out the commissioning checklist in Module 6.
General| Brand | GEW |
|---|---|
| Model | RHINO |
| Category | Power Supply |
| Language | English |
To Next Page