“SMART”
Electronic control for towel radiators
WARNING
RISK OF ELECTRIC SHOCK!
Disconnect power supply before proceeding with installation.
Preserve with care the present instruction sheet and read carefully
before using the device.
•The present device has been designed for exclusive use on a
towel radiator.
•The thermostat is designed for heating the liquid contained
inside a towel radiator in combination with a heating element. Any
other use is forbidden.
•Before using, carefully ensure that the line voltage is the same
as that specified for the device (see technical specifications).
•Only use heating elements compatible with the type of used
towel radiator.
•Disconnect power supply before cleaning or before performing
maintenance of the product.
•In case of damage of the power supply cable shut down the
device and do not tamper with it. The damaged power supply
cables can be replaced exclusively by the manufacturer or by an
authorized service center. Failure to comply with the above rules
could lead to compromised system safety and void the warranty.
•Store and transport the heating element exclusively in the
protecting packaging.
•Replacement of the heating element can be done exclusively by
the product manufacturer.
Unit D, Lostock Ind. Est., Lostock Lane, Bolton. Lancashire. BL6 4BL.
Tel. 01204 695387 E-mail
sales@geyser.co.uk or aftersales@geyser.co.uk
To Next Page
Loading...