GEZE GC 339 Manual

Commissioning GC 339
18
à Test the width of the required area using a piece of paper (DIN A4), since
the spot nder detects over the whole emission area.
X
Testing the emission area.
à The “Air: Width” parameter must be set identically (see chapter 7).
à The complete secondary closing edge of the door must be covered.
X
Set additional AIR:Width parameters.
Standard-conform sensor setting according to DIN 18650 / EN 16005
Installation height Detection width DIN 18650 / EN 16005
2.00 m
2.20 m
2.50 m
3.00 m
3.50 m
2.00 m
2.20 m
2.50 m
2.50 m / 3.00 m
2.50 m / 3.00 m

GEZE GC 339 Specifications

General

Brand	GEZE
Model	GC 339
Category	Security Sensors
Language	English