Need help?Do you have a question about the GEZE SL NT and is the answer not in the manual?
General| Brand | GEZE |
|---|---|
| Model | SL NT |
| Category | Racks & Stands |
| Language | English |
General warnings regarding material damage and injuries.
Explanation of symbols for important notes and additional information.
Specifies the intended applications for the Slimdrive SL NT and SL NT-FR.
Lists mandatory and recommended safety procedures during installation and use.
Guidelines for safe working practices, including electrical safety and injury prevention.
Checks for safety features like pinching, impact, and shearing spots.
Instructions for proper disposal and recycling of the door system components.
Lists available diagrams for installation, wiring, cable plans, and safety analysis.
Lists necessary tools and their specifications for installation.
Refers to drive and module bearer drawings for torque specifications.
Instructions for cutting the running rail and cover to the required length.
Steps for cutting and inserting the brush into the running rail.
How to screw on sheet-metal parts and fit side panels and stop buffers.
Guidance on fitting the left-hand module bearer according to the drawing.
Instructions for connecting the alarm contact switch to the locking mechanism.
Steps for routing and connecting cables to the left-hand module bearer.
Guidance on fitting the right-hand module bearer as shown in the drawing.
Instructions for connecting rotary transducer and motor cables to the control unit.
Steps for fastening pre-mounted module bearers and fitting the cover.
Instructions for mounting roller carriages on the door leaf for 1-leaf systems.
Attaching the short driver to the clamping plate for 2-leaf systems.
Attaching the long driver to the roller carriage for 2-leaf systems.
Attaching continuous roller carriages with supporting brackets for 1- and 2-leaf systems.
Checks for proper installation, including façade construction and surface evenness.
Initial steps for mounting the drive, including inserting intermediate plates.
Instructions for mounting the running rail and installing profiles.
Procedures for fitting the door leaf, including safety warnings.
Steps to insert and secure the roller carriage into the running rail.
How to suspend the door leaf on adjustment screws and screw it into place.
Procedures for adjusting the parallel position and height of the door leaves.
Instructions for fitting the pre-assembled module bearers onto the running rail.
Steps for threading and fitting the toothed belt and its lock.
How to pre-tension the toothed belt to the specified force.
Adjusting the closing position for 2-leaf door systems.
Connecting the transformer cable to the control unit.
Connecting the optional toothed belt locking and control unit.
Instructions for fitting safety and actuation equipment and routing cables.
Guidance for electrical installation of switches and buttons.
Instructions for electrical installation of the programme switch.
Steps for mounting the earthing connection onto the running rail.
Aligning and tightening the toothed-belt locking device.
Connecting the drive to the 230 V mains and switching it on.
Instructions for mounting the cover suspension pieces and cover earthing.
Steps for hanging the cover safety rope and fitting the hood.
Information on safety sensors, inputs/outputs, and creating a test log.
Performing safety analysis and recording installed options.
General instructions for dismantling the system in reverse order of installation.
Procedures for checking and tensioning the toothed belt.
Periodic maintenance tasks and checks for various system components.
Lists common mechanical faults and their remedies.
Steps to check door leaf movement and diagnose drive motor issues.
Detailed steps for removing and replacing the roller carriage.
Instructions for removing and replacing brushes on the roller carriage.
Guidance on interpreting fault messages from the control unit.
Safety precautions and steps for replacing a fuse in the transformer.
To Next Page