EMD / EMD-F / EMD-F-IS / EMD-F/R / EMD Invers
6
Abbreviations
1.5 Disposal of the door system
à The door system is made up of materials that should be sent for recycling.
The individual components have to be sorted in accordance with their material type.
à Aluminium (proles, covering, return pulleys, sliding blocks, ...)
à Iron (driver, screws, ...)
à Plastic
à Electronic parts (bolt, motor, control unit, transformer, sensors, ...)
à Cables
The parts can be disposed of at the local recycling depot or by a scrap recycling company.
à Batteries contain pollutants and heavy metals. Do not dispose of with household waste.
Hand in rechargeable batteries to your local recycler, too.
2 Abbreviations
Wire colours
BN brown
BK black
BU blue
GN green
GY grey
YE yellow
OG orange
PK pink
RD red
TQ turquoise
VT violet
WH white
Connections, terminals and plugs
Au Automatic
BS Hinge side
BGS Opposite hinge
side
DO permanent hold
Open
DPS Display pro-
gramme switch
END Latching action
GF Active leaf
GND Ground
KA External contact
sensor
KB Authorised contact
sensor
KI Internal contact
sensor
LK Luster terminal
LS Shop closing
MPS Mechanical programme
switch
NA Night
OFF O
PA Programmable output
PE Programmable input
RBM Radar movement detec-
tor
RES Pushbutton
RM Bolt message
RSZ Smoke switch control
unit
RS485 Communication signal
to DPS, TPS and second
drive
SF Fixed leaf
STOP Stop
SCR Screen
SO Safety sensor, open
SIS Safety sensor, close
STG Fault
TK Door transmission cable
TOE Electric strike
TPS Keypad programme
switch
TST Test signal for safety sen-
sors
24V Supply voltage for exter-
nal devices