Slimdrive EMD/EMD-F
9
Umbau / Replacement
Ausführung mit Klemmenblock /
Version with terminal block
X
Kabel vom Klemmenblock (3) lösen.
X
Loosen the cable at the terminal
block(3).
3
Ausführung mit Netzschalter /
Version with main switch
X
Antrieb am Netzschalter (1) ausschalten
(Schalterstellung0).
X
Stecker (2) abziehen.
X
Switch the drive o at the main switch (1)
(switch position 0).
X
Remove the connector (2).