Need help?Do you have a question about the GEZE Slimdrive EMD-F-IS and is the answer not in the manual?
General| Brand | GEZE |
|---|---|
| Model | Slimdrive EMD-F-IS |
| Category | Door Opening System |
| Language | English |
Identifies warnings for property damage and personal injury.
Crucial safety guidelines to follow for personal safety.
Details the different control units (DCU201, DCU202, DCU204) and their components.
Functions and connections for configurable output PA1, including Gong and Fault.
PA1 functions for warnings and electric strikes.
PA1 functions for motor fan, door mode, light, and day/night switching.
PA1 function for maintenance signalling.
Functions and connections for configurable output PA2, including Gong and Fault.
PA2 functions for electric strikes, motor fans, and door modes.
PA2 functions for day/night switching and maintenance signalling.
Functions and settings for configurable output PA3, focusing on hold-open magnets.
Details on connecting DC and AC electric strikes and bolt signals.
Using internal programme switches to set operating modes.
Different methods for setting operating modes via switches.
Using keypad or display switches for operating mode selection.
Further DPS options and security measures for mode selection.
Specific servo function settings for fire protection doors.
Steps for commissioning using the Display Programme Switch (DPS).
Detailed process for commissioning a new 1-leaf drive with DPS.
Process for commissioning new 2-leaf drives with DPS.
Using the ST220 service terminal for configuration.
Explains how faults are displayed on ST220 and DPS, and lists common fault codes.
Continues the list of fault messages and their descriptions.
To Next Page