17
Sensor
2. Menu selection and
confirmation
3 Setting 4 Storing
Hinged wedge sensor 00 = Telescopic lip
01 = sensitive
20 = insensitive
Press setting
button
Maintenance
Maintenance cycle
counter pre-selection
01-99 corresponds to 1,000-
99,000 cycles to be counted
down
Press setting
button
Response of
maintenance cycle
counter
Indication in “CS” display with
previously-set value
Press setting
button
Changeover of the auto-reset
function to hold-to-run with “CS”
display and set value
To Next Page
Loading...
