14
11. Smell inside the device's
interior volume.
Lack of regular or thorough
cleaning inside the interior
volume.
The device is kept turned off
for prolonged periods of
times.
Storing spoiled products.
Carefully wash the interior volume
of the device.
Enable ventilation for 3-4 hours.
11. MANUFACTURER WARRANTY.
11. 1. Warranty period is 12 months from the date of selling the device, but not
longer than 18 months from the manufacturing day.
11. 2. During the warranty period, service providers will perform all diagnostics and
replacing defective components.
11. 3. Warranty is valid during the maintenance. Warranty liabilities do not include
maintenance during the warranty period. Maintenance is a paid service, provided by the
service provider.
11. 4. During the stage of testing and commissioning, the Buyer shall sign a
technical service agreement with the service provider.
11. 5. Warranty liabilities are valid with the following documents:
– Device manual;
– Commissioning sheet;
– Technical service agreement with the service provider.
Both Buyer and the service provider representative shall sign the sheets and verify
with the stamps.
11. 6. Warranty liabilities become null in the following cases:
− device operation violates the requirements in the Manual;
– components and joins have sustained damage during improper transportation,
loading-unloading operation, storing, testing and commissioning and operation;
– device has sustained damage caused by incorrect connection, setup, abnormal
operation or in conditions that were not specified by manufacturer;
– damage is caused by abnormal voltage fluctuations;
– damage is caused by fire, lightning strike, flood or other natural calamities;
– altered product design or accessories, or unauthorized repairs;
– device has sustained mechanical damage or has traces of chemicals;
– device was operated in violation with article 1.3 of this Manual.
11. 7. The following details are not covered by warranty: plastic and rubber parts,
sealants, gaskets, price tag holders, light sources, expendable materials.
11. 8. If the device was delivered to buyer not on manufacturer's transport, no claims
on quality and missing components will be accepted.
11. 9. Manufacturer does not give any warranty on compatibility between acquired
equipment and the Buyer's equipment. Manufacturer will not be obligated to accept back
the effective unit, if it is for any reason unfit for the Buyer.
11. 10. If the qualified personnel from the manufacturing facility or other
organization, authorized to perform maintenance, discover that malfunctioning was
caused by the Buyer's actions, the Buyer will take on the responsibility to reimburse all
To Next Page
Loading...