Need help?Do you have a question about the GHH RAND CF90D4 and is the answer not in the manual?
Describes the application and scope of Series CF compressors.
Basic instructions for installation, operation, and maintenance.
Defines requirements for personnel performing work on compressors.
Lists applicable safety provisions, standards, and regulations.
Operator responsibilities for safe operation and system integrity.
Procedures and precautions for service, inspection, and mounting work.
Prohibits modifications and use of non-original parts.
States limitations on operating conditions and modes.
Covers system design, motor, airend, and piping safety measures.
Covers lubricant types, selection criteria, and impact of impurities.
Covers proper installation procedures for couplings and belt drives.
Instructions for filling the compressor with oil before initial operation.
Describes the application and scope of Series CF compressors.
Basic instructions for installation, operation, and maintenance.
Defines requirements for personnel performing work on compressors.
Lists applicable safety provisions, standards, and regulations.
Operator responsibilities for safe operation and system integrity.
Procedures and precautions for service, inspection, and mounting work.
Prohibits modifications and use of non-original parts.
States limitations on operating conditions and modes.
Covers system design, motor, airend, and piping safety measures.
Covers lubricant types, selection criteria, and impact of impurities.
Covers proper installation procedures for couplings and belt drives.
Instructions for filling the compressor with oil before initial operation.
General| Type | Rotary Screw |
|---|---|
| Cooling | Air |
| Power | 90 kW |
| Oil-injected | Yes |
| Drive | Direct |
| Drive Type | Direct |
To Next Page