It is the newest product innovation providing optimum Pump Control using a combination of
hydraulic and electronic engineering. Designed specifically for fresh water distribution on marine
applications.
Features & Benefits
Maintains constant pressure and flow.
Built-in pressure and flow switch.
Built-in check valve.
Built-in dry-run protection.
Assists in absorbing water hammer.
Eliminates pump pressure switch.
No adjustment or maintenance required.
Simple installation saves space and time
Can be used with or without pressure tank.
Components in contacts with water in brass
HANDLING
The product must be lifted and handled with care. When lifting and moving pump, ensure it is firmly
held and supported.
PRELIMINARY INSPECTIONS
Unpack the pump and check its integrity. Furthermore check that the details on the plate
corresponds with the dates required and that the shaft turns freely. If there is any irregularity,
please contact the supplier immediately, signalling the nature of the defects.
Caution: If there is any doubt about safety of the pump, do not use it.
WORKING LIMITS
The electronic board is completely dust-proof.
Before installation, ensure that main supply is grounded in accordance with local legislation and
corresponds to motor plate details. Before carrying out any maintenance, ensure safety by
switching off main voltage.
The machine is electrically supplied: avoid the contact between the liquid pumped and electrical
part of the machine.
To Next Page
Loading...
