72
12
Apply Battery Terminal Grease onto the power connector.
By using this type of grease the battery slides more easily into place, the
grease will also protect the connectors against moisture.
13
Place the battery back into the tube. Make sure the EnergyPak is
locked; Only if the lock assembly makes a clear *click* sound, the battery
is locked properly.
It is unsafe to ride with a battery that is not locked properly.
14
Check if the EnergyPak can smoothly move in and out of the frame when
locking and unlocking.
15
If everything works properly, the process is finished.
To Next Page
