Giant Road Pro - Adjustment of Pedal Binding Tension; Pedal Use

ADJUSTMENT OF PEDAL BINDING TENSION
To adjust tension of the rear binding on pedals, turn 3mm Allen key tension adjustment bolt in the spring cavity (show
in fig. 2.)
1. Increase tension in a clockwise direction(+) (for more secure shoe/pedal bind but more difficult engagement
and disengagement)
2. Decrease tension in a counter-clockwise direction(-) for less secure shoe/pedal bind easier engagement and
disengagement. See fig. 2. IMPORTANT: Binding tension must be equal on both pedals to achieve a uniform
effect when engaging and disengaging cleated shoes. MINIMUM TENSION IS RECOMMENDED FOR
BEGINNERS AND FOR RIDERS REQUIRING FREQUENT
CLEAT RELEASE SUCH AS IN HEAVY TRAFFIC. (SEE CAUTION)
PEDAL USE
1. Engage cleated shoes in pedals by pushing front of cleat into front binding then pushing heel down until rear
binding engages on cleats. See fig. 3.