Giant SUSPENSION User Manual

Step 1: Turn spring tension collar counter clockwise to minimal tension.

Step 2: Mark the collar edge with a marker to measure full rotations.

Step 3: Measure the eye-to-eye distance of the shock without any load.

Step 4: Sit on the bike and have a partner measure the eye-to-eye distance with rider seated.

Step 5: Subtract weighted from unweighted distance to determine sag.

Steps 6-7: Adjust collar clockwise for less sag, or consider spring replacement if needed.

Details Faith model's Maestro suspension design, pivot placement, and sag reliance for riding styles.

Offers sag recommendations and compressed shock lengths for the DH model, referencing setup instructions.

Explains how to change AC travel from 5.3" to 6.3" using the dual-position shock mount.

Instructions on adjusting Warp DS travel between 4" and 5" via the rear shock mounting bolt.

Differentiates Trance/Reign (Maestro) sag setup from NRS 'no sag' setup.