To Next PageTo Next Page
Need help?Do you have a question about the Giant TRINITY ADVANCED SL and is the answer not in the manual?
Provides essential safety warnings and caution descriptions for handling and operating the bicycle.
Introduces the proprietary braking system with reverse-position front brake and chainstay-mounted rear brake for stopping power.
Guides users on selecting the correct frame size based on rider height, inseam, and saddle height using provided tables.
Details how to set saddle height and adjust the AeroDrive cockpit for optimal rider positioning.
Provides step-by-step instructions for assembling the FSA N°26G2 headset, including greasing and tightening procedures.
Explains how to adjust armrest height using teardrop spacers and selecting appropriate screw lengths.
Describes how to adjust the fore and aft position of the armrest pads by bolting them onto the clamps.
Explains how to adjust the width of the armrest pads using different hole configurations for various rider widths.
Explains how to cut the Vector SLR seatpost to the correct length and adjust height using spacers for optimal fit.
Introduces the SpeedControl system, emphasizing safe usage, proper braking techniques, and avoiding modifications.
Details the installation of brake calipers, torque specifications, and precise brake pad alignment for optimal braking.
Details the step-by-step process for installing the bottom bracket, including adapter preparation and pressing.
Provides essential safety warnings and caution descriptions for handling and operating the bicycle.
Introduces the proprietary braking system with reverse-position front brake and chainstay-mounted rear brake for stopping power.
Guides users on selecting the correct frame size based on rider height, inseam, and saddle height using provided tables.
Details how to set saddle height and adjust the AeroDrive cockpit for optimal rider positioning.
Provides step-by-step instructions for assembling the FSA N°26G2 headset, including greasing and tightening procedures.
Explains how to adjust armrest height using teardrop spacers and selecting appropriate screw lengths.
Describes how to adjust the fore and aft position of the armrest pads by bolting them onto the clamps.
Explains how to adjust the width of the armrest pads using different hole configurations for various rider widths.
Explains how to cut the Vector SLR seatpost to the correct length and adjust height using spacers for optimal fit.
Introduces the SpeedControl system, emphasizing safe usage, proper braking techniques, and avoiding modifications.
Details the installation of brake calipers, torque specifications, and precise brake pad alignment for optimal braking.
Details the step-by-step process for installing the bottom bracket, including adapter preparation and pressing.
General| Wheel Size | 700c |
|---|---|
| Frame Material | Advanced-Grade Composite |
| Fork | Advanced-Grade Composite, full-composite OverDrive steerer |
| Drivetrain | Shimano or SRAM electronic (depending on model) |
| Tires | Giant Gavia, tubeless, 700x25c |
| Geometry | Aero |
| Stem | Giant Trinity |
| Saddle | Giant Trinity |
| Shifters | Shimano or SRAM electronic (depending on model) |
| Front Derailleur | Shimano or SRAM electronic (depending on model) |
| Rear Derailleur | Shimano or SRAM electronic (depending on model) |
| Cassette | Shimano or SRAM (depending on model) |
| Chain | Shimano or SRAM (depending on model) |
| Crankset | Shimano or SRAM (depending on model) |
| Bottom Bracket | Shimano or SRAM (depending on model) |
