21
Brake cable and housing
Brake cable and hosing quality is important to insure a correct braking
performance.
Giant recommends SHIMANO or JAGWIRE CEX.
As shown on the figure above, a hosing connector is necessary to facilitate
maintenance and the AeroDrive cockpit disassembly.
For a traditional cable routing, front brake is mounted on the left, rear brake
on the right.
For United Kingdom or Australia, front brake is mounted on the right, rear
brake on the left.
Figure 12 : brake cable routing
22
Index cable and housing
Giant strongly recommends the following cable routing and following cable
and hosing specification.
NOKON Konkavex hosing and liner is necessary in certain area of the
frameset.
More info on NOKON products : http://www.nokon.de
For “Classic” hosing, SHIMANO
SIS-SP41 or JAGWIRE LEX quality is
required as it’s assembled on our TRINITY Advanced SL complete bikes.
Figure 13: index cable routing
To Next Page
Loading...
