D
David HartSep 8, 2025
Why does my Giant UG30 Water Heater have smelly water?
- SSandra RoblesSep 8, 2025
Smelly water in your Giant water heater can be caused by sulfides in the water. To resolve this, replace the anode with a special anode.
Why does my Giant UG30 Water Heater have smelly water?
Smelly water in your Giant water heater can be caused by sulfides in the water. To resolve this, replace the anode with a special anode.
Why is there condensation on my Giant UG30?
Condensation on your Giant water heater could be caused by a temperature setting that is too low. Try increasing the temperature setting.
Why does the burner flame float and lift off ports on my Giant UG30 Water Heater?
If the burner flame on your Giant water heater floats and lifts off the ports, it could be due to: * An orifice that is too large: Replace it with the correct orifice. * A dirty burner: Clean and correct the source of the problem. High gas pressure or cold drafts might also be factors.
Brand | Giant |
---|---|
Model | UG30 |
Category | Water Heater |
Language | English |