Giant WARP 2004 User Manual

WARP
Model Year 2004
Owners Manual
August 2003
Dual Suspension bike
• FluidForm™ AluxX 6061 aluminium frame material
• Cantilever rear suspension system
• Sealed bearings in main pivots
• 2 rear shock positions for 4.6" and 5.3" rear wheel travel
• Coil spring oil damping rear shock

Giant WARP 2004 Specifications

General

Brand	Giant
Model	WARP 2004
Category	Bicycle
Language	English

Summary

Introduction to the Giant Warp

Bike Sizing and Frame Geometry

Exploded View and Parts Identification

Rear Suspension System Operation and Tuning

Selecting Rear Travel Positions

Choose between 4.6" or 5.3" rear wheel travel by repositioning the shock.

Giant HV Coil Spring Shock

Overview of the Giant HV coil spring rear shock components and adjustments.

Setting Pre-load and SAG Adjustment

Procedure for adjusting rear shock pre-load and rider sag for optimal performance.

Changing the Coil Spring

Guidance on replacing the rear shock coil spring, emphasizing dealer service.

Damping Adjustment

How to adjust the rebound damping of the rear shock using the external knob.

Rear Suspension Tuning Recommendations

Advice on tuning suspension based on rider weight, style, and terrain conditions.

Removing Rear Shock and Pivots

Instructions and safety warnings for removing the rear shock assembly or pivot points.

Component Tightening Torque Specifications

Bike Cleaning and Routine Maintenance