Gigabyte 7VT600P-RZ - Integrated Peripherals

- 26 -7VT600P-RZ Series Motherboard
English
Integrated Peripherals
" * " Only for 7VT600P-RZ.
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
OnChip Serial ATA [Enabled]
AC97 Audio [Auto]
VIA Onboard LAN * [Enabled]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
VIA LAN Boot ROM * [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
Game Port Address [201]
Midi Port Address [330]
Midi Port IRQ 10
Item Help
Menu Leve l X
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
OnChip IDE Channel0
When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
OnChip Serial ATA
Enabled Enable onboard VT8237 Serial ATA support. (Default value)
Disabled Disabled VT8237 Serial ATA support.
AC97 Audio
Enabled BIOS will automatically detect onboard AC97 Audio. (Default value)
Disabled Disabled AC97 Audio.
VIA Onboard LAN *
Enabled Enable VIA Onboard LAN function. (Default value)
Disabled Disable this function.
USB 1.1 Controller
Disable this option if you are not using the onboard USB feature.
Enabled Enabled USB Controller. (Default value)
Disabled Disabled USB Controller.