- 32 -7VT600P-RZ Series Motherboard
English
Reset Case Open Status
Disabled Don't reset case open status. (Default value)
Enabled Clear case open status at next boot.
Case Opened
If the case is closed, "Case Opened" will show "No".
If the case have been opened, "Case Opened" will show "Yes".
If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save
CMOS, your computer will restart.
Current Voltage (V) Vcore / DDR Vtt / +3.3V / +12V
Detect system's voltage status automatically.
Current System Temperature
Detect System Temp. automatically.
Current CPU Temperature
Detect CPU Temp. automatically.
Current CPU FAN / SYSTEM FAN Speed (RPM)
Detect Fan speed status automatically.
Fan Fail Warning (CPU / SYSTEM)
Disabled Don't monitor current fan speed. (Default value)
Enabled Alarm when stops.
Frequency/Voltage Control
Spread Spectrum Modulated [Enabled]
CPU Host Clock Control [Disable]
ÚCPU Host Frequency(MHz) 133
ÚPCI/AGP Frequency(MHz) 33/66
DRAM Clock(MHz) [Auto]
CPU OverVoltage Control [Auto]
AGP OverVoltage Control [Auto]
DIMM OverVoltage Control [Auto]
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
Item Help
Menu Level X
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
ÚThose items will be available when "CPU Host Clock Control" is set to Enabled.
To Next Page
Loading...
