Gigabyte G1.Sniper H6 - Page 34

BIOS Setup
- 34 -
Classic Setup Function Keys
<
f
><
g
> Move the selection bar to select a setup menu
<
h
><
i
> Movetheselectionbartoselectancongurationitemonamenu
<Enter> Execute command or enter a menu
<+>/<PageUp> Increase the numeric value or make changes
<->/<PageDown> Decrease the numeric value or make changes
<F2> Switch to ST Mode or Startup Guide screen
<F5> Restore the previous BIOS settings for the current submenus
<F7> LoadtheOptimizedBIOSdefaultsettingsforthecurrentsubmenus
<F8> Access the Q-Flash utility
<F9> Display system information
<F10> Save all the changes and exit the BIOS Setup program
<F12> Capture the current screen as an image and save it to your USB drive
<Esc> Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
B. Classic Setup
Classic Setup is the conventional BIOS Setup interface where you can press the arrow keys on your keyboard
tomoveamongtheitemsandpress<Enter>toacceptorenterasub-menu.Oryoucanuseyourmouseto
select the item you want.
(SampleBIOSVersion:G1.SniperZ6F1h)
Setup Menus
Function Keys
Help
Enter Q-Flash
Select Default
Language
CongurationItems Current Settings
Switch to
ST Mode