Gigabyte G1.Sniper H6 - Page 61

- 61 -
Conguring SATA Hard Drive(s)
Step 5:
After setting the capacity, move to Create Volumeandpress<Enter>tobegin(Figure6).
After completing, you'll be brought back to the Intel(R)RapidStorageTechnology screen. Under RAID Volumes
youcanseethenewRAIDvolume.Toseemoredetailedinformation,press<Enter>onthevolumetocheckfor
informationonRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.(Figure7).
Figure 6
Figure 7