Gigabyte G1.Sniper M3 - Page 22

- 22 -Hardware Installation
Refer to the instructions on setting up a 2/5.1-channel audio conguration in Chapter 5, "Conguring
2/5.1-Channel Audio."
Line In/Mic In Jack (Pink)
The line in/Mic in jack. Use this audio jack for line in devices such as optical drive, walkman, microphone,
etc.
Line Out (Light Green)
The default line out jack. Use this audio jack for a 2-channel speaker. This jack can be used to connect
front speakers in a 5.1-channel audio conguration.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Center/Subwoofer Speaker Out Jack (Orange)
Use this audio jack to connect center/subwoofer speakers in a 5.1-channel audio conguration.
Rear Speaker Out Jack (Black)
Use this audio jack to connect rear speakers in a 5.1-channel audio conguration.
Headphone Jack (Blackish Green)
Use this audio jack to connect a headphone. The headphone jack has a built-in amplier and it is
recommended that the headphone be connected to this jack for better sound quality.