Gigabyte G1.Sniper M3 - Internal Connectors Guide

- 23 - Hardware Installation
1-8 Internal Connectors
Read the following guidelines before connecting external devices:
First make sure your devices are compliant with the connectors you wish to connect. •
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power •
cord from the power outlet to prevent damage to the devices.
After installing the device and before turning on the computer, make sure the device cable has •
been securely attached to the connector on the motherboard.
1) ATX_12V
2) ATX
3) CPU_FAN
4) SYS_FAN1/2/3
5) BAT
6) SATA3 0/1
7) SATA2 2/3/4
8) F_PANEL
9) F_AUDIO
10) F_USB1/F_USB2/F_USB3
11) F_USB30
12) TPM
13) CLR_CMOS
3
2
12
11
109
4
7
1
4
8
6
7
5
4
13