Gigabyte G1.Sniper - Page 44

BIOS Setup - 44 -
Different Ranks
Options are: Auto (default), 1~8.
On The Same Rank
Options are: Auto (default), 1~2.
>>>>> Channel A/B/C Writes Followed by Writes
Different DIMMs
Options are: Auto (default), 1~8.
Different Ranks
Options are: Auto (default), 1~8.
On The Same Rank
Options are: Auto (default), 1~2.

Advanced Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Advanced Voltage Control
****** Mother Board Voltage Control ******
Voltage Types Normal Current
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration [Auto]
CPU Vcore 1.22500V [Auto]
x Dynamic Vcore(DVID) +0.00000V [Auto]
QPI/Vtt Voltage 1.150V [Auto]
CPU PLL 1.800V [Auto]
>>> MCH/ICH
PCIE 1.500V [Auto]
QPI PLL 1.100V [Auto]
IOH Core 1.100V [Auto
ICH I/O 1.500V [Auto]
ICH Core 1.100V [Auto]
>>> DRAM
DRAM Voltage 1.500V [Auto]
DRAM Termination 0.750V [Auto]
Ch-A Data VRef. 0.750V [Auto]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

Ch-B Data VRef. 0.750V [Auto]
Ch-C Data VRef. 0.750V [Auto]
Ch-A Address VRef. 0.750V [Auto]
Ch-B Address VRef. 0.750V [Auto]
Ch-C Address VRef. 0.750V [Auto]
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Advanced Voltage Control